Most pressure washers that you''ll find for rent or sale are gas-powered. This type can deliver higher water pressure than the electric kind, some more than 3,000 psi. But gas-powered washers also require more water: 2 to 3 gpm. These washers are the best choice for bigger jobs like preparing siding for painting (Photo drillpressjigs 2), removing "aging" stains from drillpressjigs wood decks (Photo 5) and deep-cleaning concrete. You can rent one for about drillpressjigs $60 a day, plus the cost of accessories like chemical injectors (Photo 1) or longer spray wands for reaching high places. Gas-powered washers (non-commercial drillpressjigs and drillpressjigs units) cost $300 to $800 depending on the pressure they deliver, their features and the engine and pump quality. Wheel sizes range from 4 X 2 in. to 8 X 2 in. with a choice of roller, Delrin, or precision ball bearings. Typical applications include automotive plants, tire plants, food processing, floor scrubbing equipment, and aircraft/aerospace plants. Swivel nylon casters feature thermoplastic rubber tires bonded to a polypropylene wheel center. Double-sealed precision ball bearings in the swivel head and wheel hub deliver smooth operation. The casters withstand corrosion and temperatures to 230[degrees]F. They are available in wheel diameters of 100, 125, 150, and 200 mm with load capacities from 100 to 130 kg. They can be ordered with bolt holes, threaded stems, fittings for round or square tubes, fixed pins or plate mountings, and with or without brakes. A line of electrically conductive nylon casters is also available. Odds and endsDoes your company ever install underground, insulated hot or super-chilled water lines? Then you know the process: Dig a trench and put crews drillpressjigs of men to work long hours assembling steel pipe with drillpressjigs foam insulation filling a steel jacket, which eventually becomes clogged and corroded with age. There is a better way.A company called Ecoflex now has pre-assembled and insulated lengths of single and dual-pipe runs -- as long as 650 ft. -- that can be laid quickly by a minimal drillpressjigs crew. Cross-linked polyethylene pipe is available in sizes to 4 in. and all surfaces are smooth as well as non-corrodable, and the insulation doesn''t drillpressjigs absorb water.
|