|
|
Power SuppliesWelding power supplies drillpresscrossvise take alternating or direct current from a power line or portable generator and convert it to current usable at the welding arc:, Check National Electrical Manufacturers Association (NEMA) Standards Publication EW1, Electric Arc Welding Power Supplies, and manufacturers'' literature for construction and performance requirements of individual machines.Among types of power supplies, alternating-current (ac) transformers are least costly-most use 230 V single phase input power. Direct-current (DC) transformer-rectifiers convert AC to DC, using single- or three-phase power to produce constant voltage (cv) or variable voltage (vv). AC-DC drillpresscrossvise transformer-rectifiers can AC and DC weld. "Material handling and threshing performance on all STS combines has been enhanced because of a new, wider right-hand radius profile on the concave," Moron says. "The increased right-hand threshing width promotes faster, smoother crop flow with more complete threshing. The wider concave radius also helps to reduce overall power consumption in high-volume, tough material drillpresscrossvise handling crop conditions."Adding to the productivity of the 9760 STS and the 9860 STS is a new high capacity unloading system. Delivering a 150 percent increase in the unloading rate versus previous models, the high-capacity system unloads at 3.3 bushels per second, the fastest unloading rate of any combine produced today. The high-capacity unloading system is standard equipment drillpresscrossvise and drillpresscrossvise on the 9860 STS and optional on the 9760 STS. WILLIAM''s new line of screwdrivers features square handles and square shanks to prevent rollaways and deliver more twist. These tools are ideal for heavy-duty work involving tough-to-budge slotted drillpresscrossvise screws and holes. The square shank provides a perfect grip for pliers or wrenches in order to deliver more torque with safety. The square-shaped handle with molded-in thumb stop creates a stronger, comfortable grip for turning difficult screws by hand. It also prevents the screwdriver from rolling away when laid down. Rounded corners, a textured surface, and a resilient feel make the handle comfortable to the hand. Chrome blades resist corrosion and facilitate clean-up after the job. The drivers come in 3/16, 5/16 and 3/8 in. blades and various lengths. There''s no greater sin in gunsmithing than buggering a screw. Well, there might be, but screw-buggering is still at the top of the heap. I don''t know how I''d get along without the sets of Brownells Magna-Tip screwdrivers I use all the time. Now, Brownells has brought us some kits designed with specific guns in mind and a very handy gadget called the "Designated Driver" that will drillpresscrossvise and drillpresscrossvise hold four -- count ''em, four -- Magna-Tip bits.
|