HULL: 207'' x 176'' x 20''.VARIABLE LOAD: 3,451 kips.HELIPORT: 70'' drill diameter.STORAGE: Mud & Cmt Bulk--7,700 cf; Sackstorage--4,000 sks; Liquid Mud--1,502 bbl;Fuel--2,287 bbl; Water for Drilling--6,655 press bbl;Potable Water--983 bbl.DRILLING EQUIPMENT: Drawworks--Nat''l 1320-UEdriven by two 800 hp motors; Pumps--twoNat''l 12-P-160, 6 1/2" x 12" x Triplex; Primemovers--three EMD 16645 EL diesel engines,three 1,500 KW GE A-20-N6 gens, Baylor ThyrigII spindle SCR system; drill Rotary Table--Nat''l C-375; PipeHandling System--Varco IR-2000; Top Drive--Varco TDS-3. Jamerco press of City of Industry Calif., introduces its new Air Palm-Hammer. The palm-sized spindle pneumatic tool has an operating pressure-range of 50-120 PSI and a consumption of 2-4 CFM. It drives a drill variety of nails and spikes. Operation press is triggerless and is spindle performed drill by pressing the loaded nailer down over the target. The kit includes a standard common nail attachment, a magnetic tip attachment which holds nails in place, a finish nail attachment, a hammer attachment and a complete maintenance press kit. A leather glove spindle is also included. In the production of pig iron, brick and refractory materials are used to form the very large drill ovens or retorts (coke ovens) in which coal is converted to coke. Refractory and brick materials are needed to line huge shaft-like blast furnaces in which the molten pig is formed. press The auxiliary furnaces or hot blast stoves, which heat the air for the blast furnace, are also lined with refractories. The molten pig iron from the blast furnace is then sent to a spindle brick- or refractory-lined ladle. The molten pig iron is then poured into a brick- or refractory-fined pig casting machine, where the pig iron is formed into large castings and cooled.
|