|
|
Jamerco of City of Industry Calif., introduces its new Air Palm-Hammer. The palm-sized pneumatic tool has an operating pressure-range of 50-120 PSI and a consumption of 2-4 CFM. It drives a variety of nails and spikes. Operation is triggerless and is performed by pressing dremelanddrillandpress the loaded nailer down over the target. The kit includes a standard common nail attachment, a magnetic tip attachment which holds nails in place, a finish nail attachment, a hammer attachment and a complete maintenance kit. A leather glove is also included. In the production of pig iron, brick and refractory materials are used to form the very large ovens or retorts (coke ovens) in which coal is converted dremelanddrillandpress to coke. Refractory and brick materials are needed to line huge shaft-like blast furnaces in which the molten pig is formed. The auxiliary furnaces or hot blast stoves, which heat the air for the blast furnace, are also lined with refractories. The molten pig iron from the blast furnace is then sent to a brick- or refractory-lined ladle. The molten pig iron is then poured into a brick- or refractory-fined pig casting machine, where the pig iron is formed into large castings and cooled. Saw Uses CV or CC Power Supplies,... 200 to 1,500 A, 28 to 44 V, at 60- to 100-percent-duty cycle. Automatic units commonly use up to 1,500 A on one wire. dremelanddrillandpress Cv welding dremelanddrillandpress machines that offer variable-slope control give the welder extra adjustability, and can extend the usefulness of the machine to weld a range of material thicknesses and types.Selection of Power SourcesWhen choosing a power source, start by checking NEMA specs. NEMA Class I arc-welding power sources deliver rated output at 60-, 80-, or 100-percent-duty cycle: Class dremelanddrillandpress II units, 30-, 40-, or 50-percent; and Class III, 20 percent. First consider capacity and kind of current needed for the job. Rely on the manufacturer''s rating as being conservative: don''t buy more capacity than needed. Choose low--duty-cycle machines only for maintenance or for intermittent welding. If portability is important, consider inverter units. CHICAGO -- I don''t know how many of you took my advice to attend this year''s ASHRAE Show, but it sure was a whopper when it comes to attendance.Unfortunately, while the number of attendees continues to grow, the number of companies displaying their wares has continued to dwindle. This is because many of our industry''s largest players such as Carrier, Trane, York and others have opted not to participate simply because they feel that the results of the exposure they receive don''t justify the high costs involved in displaying.
|