|
|
Test results on one inspection of 1,520 tractor and trailer combinations revealed that 46% of these vehicles had brakes that were out of adjustment. The remaining atlas OOS vehicles were cited for such defects as drill audible press air leaks, cracked brake drums, loose brake components, brake linings not firmly attached atlas to the shoe, brake lining less than one-quarter-inch thick, brake lining saturated with oil or grease, and damaged or frayed drill air line hoses or tubing.Interpreting brake termsBefore attempting to specify an air brake system for articulated vehicles, let''s define certain brake terminology so that the vehicle manufacturer, equipment dealer and truck fleet manager press are all on the same frequency of communication:Balanced Braking. This would occur on a tractor trailer combination when the brakes'' forces are atlas divided evenly between the tractor and the trailer, or trailers. The trailer brakes would apply just before the tractor brakes and the tractor brakes would release just before the trailer brakes. In other words, every brake in the vehicle combination would drill be contributing press to its designed share of the total braking effort. Also, balanced braking prevents trailer sluing (when the trailer atlas wheels lock and drill go into an uncontrollable skid), as well as tractor jackknifing. Engine oil dilution with diesel fuel isn''t normally a concern. As press dilution increases, blue smoke will appear and get thicker, alerting the operator of a problem. As long as the problem is discovered in a reasonable time, no measurable wear will occur When inspecting the engine components, the machined surfaces will have atlas a polished, chrome-like appearance. Remember, diesel fuel is an oil and lubricates drill the injection pump, which has very fine tolerances.* Injection Fuel Lines -- Fuel-injection press lines have a small (0.025in.) inside diameter Extreme care must be taken not to bend or kink a line and atlas and drill reduce the inside diameter of the tube. Any change in the inside press diameter will alter fuel flow and affect the atlas timing of that cylinder Now one person can do this alone. It''s especially important drill if you have a gooseneck hitch in the bed of the truck that you need to get to and likewise sometimes need the topper cover. The following is a look at many products press that were introduced at or since the Outdoor Power Equipment Institute''s atlas (OPEI) 20th annual International Lawn, Garden & Power Equipment Exposition in October 2003 and will be available in 2004.Hydraulic-driven drill trimmerDesigned to attach to any press zero-turn mower, the H model hydraulic-driven trimmer tackles the toughest atlas trimming jobs with ease. Its users can remain seated while trimming under fences: around drill poles, tombstones in cemeteries and guardrails on highways; and along driveways and sidewalks. press The 3 hp., 8,500-rpm atlas unit features foot controls for the on/off switch and for the lateral movement drill of the trimmer press.
|