|
|
The effort is transferred to the jaws 20 by two levers floor which act by a cam system on the links that control the automatic clamping of the jaws on the wire rope. The Hand-i-Lift was developed by a technician with 35-plus years of experience in the small engine and lawnmower repair business. It''s available in 2 models: 4-3-6 for a wheel-base of 48 inches wide by 60 inches long, and 5-3-7 for a 60-by-84 wheel-base. The standard lift height is 36 inches, but can be custom built to 44 inches high; the load limit is 1,500 pounds. Both models have removable panels to allow full access to the service drill area. The table will go from the floor to full height in 60 seconds or can be stopped in between and supported on the safety chain. Constructed press of all-welded 20 steel, the Hand-i-Lift comes with a limited lifetime warranty against floor defects in materials or workmanship. The winch, cables and pulleys drill are backed by a limited 2-year warranty. The basic units press with a wood deck cost $650 for the 43-6 and $740 for the 5-3-7. Delivery and installation are free within 200 miles of Holliday, Texas. Powered Tarping Systems provide a safe way to tarp loads 20 without having to climb floor on the back of trailers or on top drill of loads. press The operator simply connects a tarp to the spreader bar and guides the tarp along the 20 length of the trailer via a hand-held pendant control and powered winch system. The systems can be customized to fit a specific application and are available in a variety floor of materials. Optional platform and stairs are available for safe access to the side of trailers. Carbis Inc., Florence, S.C. A well-intentioned but hopelessly naive friend drill once told me that if Linda rubbed a little Goop or other good hand cleaner on the spots on my overalls, they''d come out much more easily in the wash. An alternative to a new and relatively expensive tractor is a well-running antique. They''re press not quite as capable or dependable as a contemporary tractor, but they''re 20 considerably less expensive. Small, still-working antique tractors such as a late-''40s or ''50s Farmall Cub or a low-riding, auto-style Ford floor 9N currently sell for about $2,500, a bit more if they''re outfitted with new rear tires or hydraulics. If at all possible, buy one with a newly rebuilt engine, an onboard hydraulic system, a rear-mount three-point hitch and one drill or two mechanical power takeoffs (PTOs) rather than a drawbar. Invest in a modern underframe press (Woods), rotary brush hog or field 20 mower and other post-1950s attachments. Look carefully, because museum-quality antiques from the 1930s and earlier often lack hydraulics and PTOs (Polk''s, the Antique Tractor Magazine, published by Dennis Polk Equipment of New Paris Indiana (subscriptions floor 219-831-3555) and Farm Collector from the folks at Odgen Publications in Topeka, KS (subscriptions 800-678-4883) are two great sources of info on older models better suited for displaying on the front yard drill than press grinding in the cornrows). If you intend to do any really heavy work such as logging, trenching for soil-drainage pipe, digging in a septic tank or cutting a logging road through heavy woods, consider a full-size industrial tractor with a log grapple or excavating bucket on the front and a backhoe on the stem. New, they cost five or six figures. Good used ones cost about $15,000.
|